Notice that with this mode, the device which requires an IPV6 always receive a dynamic IPv6 address. + IPv6 Stateless Address Autoconfiguration (SLAAC): provides the ability to address a host based on a network prefix that is advertised from a local network router via Router Advertisements (RA). The DNS server is used to resolve the IP address for a known host name. The DHCPv6 server specifies also a primary and optional secondary DNS server. stateful mode: DHCPv6 server maintains a database of leased IPv6 addresses, and assigns to the client an unused IPv6 address. IPv6 address is not assigned, so the IPv6 address from the Ethernet configuration is set for a Static address of Ethernet interface. There are two methods of DHCPv6: - stateless mode: Only extended information, such as primary and optional secondary DNS server, is obtained from a DHCPv6 server. This is the most used mode for IPv6 assignment. + Dynamic Host Configuration Protocol for IPv6 (DHCPv6): this mode requires a DHCPv6 server in your LAN. Answer: B Explanation There are several ways to assign IPv6 to a device: + Static IPv6: The IPv6 address, subnet prefix length and default gateway are configured manually in the system configuration file.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |